The TP-Link TL-WA801ND is a wireless N Access Point, which supports multiple operation modes like Access Point, Mulit-SSID, Bridge with AP and Universal or WDS Reapter. It can be powered with PoE for flexible deployment. The TP-Link TL-WA801ND supports multiple operation modes to enable various wireless applications.
| HARDWARE FEATURES | |
|---|---|
| Interface | One 10/100M Ethernet Port(RJ45) Support Passive PoE |
| Button | Power On/Off Button WPS Button Reset Button |
| External Power Supply | 9VDC / 0.85A |
| Wireless Standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Dimensions ( W x D x H ) | 7.1 ×4.9× 1.4 in. (181 ×125 ×36mm) |
| Antenna Type | 2*5dBi Detachable Omni Directional (RP-SMA) |
| Targets | ar71xx |
| Platform | Atheros AR7240 |
| CPU Model | MIPS 24Kc V7.4 |
| Flash | 4 MB |
| RAM | 32 MB |
| Wireless NIC | Atheros AR9285 |
| Wireless Output | 20dBi 100mW RF |
| WIRELESS FEATURES | |
|---|---|
| Frequency | 2.4-2.4835GHz |
| Signal Rate | 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) |
| EIRP | <20dBm(EIRP) |
| Reception Sensitivity | 270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER |
| Wireless Modes | AP Mode Multi-SSID Mode Client Mode Repeater Mode (WDS/Universal) Bridge with AP Mode |
| Wireless Functions | Enable/Disable Wireless Radio WDS Bridge MAC Address Filter |
| Wireless Security | 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK |
| Quality of Service | WMM |
| Management | SNMP |
| Advanced Functions | Up to 30 meters Passive PoE is supported |
A picture of the TP-Link TL-WA801ND:
TP-Link TL-WA801ND with 14dBi antennas